Container with an internal volume of 30/32 m³ of open type with reinforced construction. The increased internal dimensions and design of the power frame make it possible to provide a load capacity of up to 25,000 kg for a container of 30 cubic meters. and up to 28 000 kg for a container of 32 cubic meters.
Containers are made of sheet steel according to GOST 16523-97 and 14637-89.
Container 30 m³ - 6680х2530х2290 mm
Container 32 m³ - 6500х2530х2460 mm
Technical features of containers:
Contour binding of the container is built from a profile pipe 100x100x4 according to GOST30245-03 TM
The support of the container is an I-beam no. 18 according to GOST 8239-89, along the entire length it is welded outside with a 5 mm sheet. The bottom sheet lies on 7 frame frames of channel 100x50x4 according to GOST 8278-83.
Boards are reinforced with 7 frame channels of 100x50x4 according to GOST 8278-83.
The front side is reinforced with I-18 (two vertical posts) according to GOST 8239-89.
Additional double horizontal reinforcement of the channel side bar
The gripping eye is made of Ø50 mm circle from special steel 09G2S. The eye is reinforced by a double sheet steel 16 mm thick.
Swing gates reinforced channel 100x50x4. The locking device is made from a circle Ø36 mm.
The design of the locking device eliminates the possibility of spontaneous opening of doors at any load.